Navien E060: Dual Venturi Limit Switch Error
E060 shows up and, unlike some Navien codes, there isn't a reliable homeowner checklist that clears it — this one names a specific internal switch on the NPE series' combustion air-intake assembly rather than a supply-side problem you can fix from outside the unit.
Applies to: Navien NPE series condensing tankless water heaters
What it means
Dual Venturi Limit Switch Error — a fault in the dual venturi/air-intake limit switch assembly used on NPE models. This component isn't something owner's manuals typically walk homeowners through testing, which is why the safe-to-check list below is short compared to most other codes on this page.
Most common causes
- Failed limit switch
- Wiring fault to the switch
- Blockage in the venturi/air intake assembly
What you can safely check yourself
- No reliable homeowner fix — at most, confirm the intake and exhaust vents are unobstructed
When to call a professional
Essentially always — this is an internal component fault that needs professional diagnosis and likely part replacement.
Gas supply lines, gas control valves, and venting should only be worked on by a licensed plumber or HVAC technician. Mains/line-voltage electrical work should be done with the breaker off and, beyond a simple reset, by a qualified electrician or plumber.
What the fix costs
There's no separate published parts price for the venturi limit switch itself, but a diagnostic visit for an internal component fault like this one generally falls in the standard $150–$600 range reported for water heater service calls (Angi, Fixr), with the switch and any related labor priced by the technician once the specific part is confirmed.
Related codes
- Navien E110 — Exhaust Blockage
- Navien E016 — Heat Exchanger Overheating
- No hot water from a tankless water heater
All Navien codes
Every Navien water heater fault code — the full list on one page.
Sources
- Navien NPE owner's manual and error code troubleshooting guide (manufacturer documentation)